Bharti Power Engineering

All galvanized materials shall withstand test as per IS: 2633 (1972). The weight of zinc coating shall determine as per the method stipulated in IS: 2633(1964). The standard length of Galvanized Iron Earthing Strip shall be minimum 7 Mtrs and not exceeding 10 Mtrs.

C Channel in Stainless Steel – asian sizesC-Channels are standardized channel section. The hot rolled execution has conical flanges, while the laser fused has parallel ones. Both their tolerances are defined by ASTM A 484, the laser fused execution has additionally the product standard defined by ASTM A1069.

Stainless steel pipe is primarily used in piping systems for the transport of fluids or gases. We manufacture steel pipe from a steel alloy containing nickel as well as chromium, which give stainless steel its corrosion-resistant properties.

 Stainless steel is essentially a low carbon steel which contains chromium at 10% or more by weight. It is this addition of chromium that gives the steel its unique stainless, corrosion-resisting properties.

ot Dip Galvanized Angles, is a Mild Steel Angle that has been hot dipped in a zinc rich galvanizing process. Galvanized Steel Angle is ideal for all general fabrication and repairs where greater strength and very good corrosion resistance is required.

Cast iron test weights are precision instruments used for calibrating and verifying the accuracy of weighing scales and balances.

Description. 316 stainless steel round bar is an excellent candidate for most processing techniques as well as both indoor and outdoor applications. AISI 316 stainless steel is a non-magnetic high strength material with excellent corrosion resistance. The strength of 316 is slightly stronger than 303 and 304 stainless.

Galvanized channels are A36 hot rolled steel, or mild steel, channels that have been dipped into a molten zinc coating process (ASTM A123). Hot-dipped galvanize (HDG) can be identified by its crystallization pattern, also known as "spangle" on the surface of the material.

Description. 304 stainless steel flat bar or “flat stock” is an excellent candidate for most processing techniques as well as both indoor and outdoor applications. This product has a semi-smooth, dull grey finish and sharp defined edges with accurate dimensions throughout length.

Polypropylene rods are made of tough, lightweight material with high impact resistance and good mechanical strength which can stand temperatures up to 100 С. Polypropylene rods have lower water absorption and are resistant to many acids, alkalis, and organic solvents.